|Offered in Sizes||300x150x110mm to 1000x500x300mm|
JASH Cast Iron Tilting Tables are a useful accessory for setting work at an angle for milling or other operations. The tables have machined T-slots along length and can swing up to 45 degrees on either side. For setting purposes a degree scale, reading minimum one degree, is graduated on the end face of the cylindrical base itself. This ensures better setting accuracy. The table is set manually to the required tilt and is locked in the set position by means of two locking clamps held through bolts.
|Flatness of Working Face||0.012/300mm|
|T-Slot Size||200 x 150 x 150|
|tYPES||Hole Type & T-slot Type|
|Surface Finish||Hand scraped|
JASH Cast Iron Sub Table is used on a machining centre as ready fixture plates for tooling up. They allow easy, faster and repetitive setup on machine pallet and reduce changeover time thereby minimizing loss of operating time. They also help in protecting the surface of machine pallet and can also be used as sub-plates to provide space for the work setting.
|T-Slots||18mm having H8 tolerance|
|Surface Finish||Machined/ Hand scraped|
Cast Iron Tooling Block simultaneously provides multiple faces to hold components accurately in the vertical plane for machining on Horizontal machining centres. Upon indexing of table a new face with new components is obtained for machining resulting in significant reduction of downtime by elimination of multiple set ups. Pallet mounting tooling blocks also enable simultaneous loading and unloading of multiple fixture plates thereby reducing total set up time. Tooling Blocks can also be used for vertical clamping of components on Horizontal Boring Machines, Milling Machines, Horizontal Jig Mills etc.
Grade 1: Flatness, squareness and parallelity of vertical working faces within 20 microns over 300 mm. Equality of depth of vertical faces from sides within 50 microns.
Grade 2: Flatness, squareness and parallelity of vertical working faces within 50 microns over 300 mm. Equality of depth of vertical faces from sides within 150 microns.
Explore More Products