Cast Iron Angle Plate

JASH Cast Iron Angle Plates provide a practical means for clamping and holding work in vertical position for layout, tooling and machining.  Angle Plates are also used as a vertical reference for inspection and tooling purposes.  They make an ideal fixture for shaping, planning, milling, grinding, drilling and boring operations.

Salient Features:

• Made generally as per IS : 2554, JASH Standard Angle Plates are webbed and provided with cored slots on both working faces to facilities clamping.
• Made from close grained plain cast iron conforming to Grade FG : 220 of IS : 210.
• Castings stress relieved.
• Smaller sizes offered with Grades 1 & 2 accuracy and larger sizes offered in Grade 2 accuracy, as stated in table.
• Hand scraped surface finish for Grade-1 accuracy. Smooth machined / rough ground / rough scraped Surface finish for Grade 2 accuracy.
• Precision Angle Plates in standard sizes with accuracy as per IS : 6973, but made from the same patterns as those for the standard sizes as per IS : 2554, are made upon request.
• Vertical face of is T-slotted Angle Plates provided with horizontal machined T-Slots and the base / table face is having cored slots. Other constructional features are similar to those in case of standard angle plates as per IS : 2554.
• T-slot dimensions conform to IS : 2013. T-Slots are fixing T-Slots with tolerance H12 and are machined parallel to base and to each other within 0.1 mm per meter.
• Squareness tolerances are as shown in table. Other tolerances are generally as per IS : 2554. Higher tolerances for squareness as well as for T-slots can be ensured upon request.
• Sizes offered from 125x75x100mm to 600x600x1000mm. Custom sizes can be offered upon request.

Jash large size stacked C. I. Angle plates provide a practical means for clamping and holding work in vertical position for layout, tooling and machining. Angle plates are also used as a vertical reference for inspection. They make an ideal fixture for shaping, planning milling, grinding, drilling and boring operations.

Salient features:

• Made from close grained plain cast iron conforming to grade fg 220 of is: 210 (equivalent to GG20/ft20/30-a). Higher grades also offered on request.

• Casting stress relieved to relieve internal stresses.

• These can be made in single piece or in two sections that can be used either single or in combination for comprehensive applications.

• Highly customized and specifically designed as per loading condition. .

• T-slots on the vertical working face will be machined, along and / or across to the base.  

  sizes available:

   

• 1524 x 1676 x 1220 mm
• 3048 x 1676 x 2896 mm
• 1220 x 1830 x 4270 mm
• 1500 x 1200 x 3000 mm
• 1300 x 2000 x 5000 mm
• 1100 x 700 x 2200 mm